FEATURES

• Pull type with hitch (for positive controlled down pressure)
• Can be pulled at highway speeds (subject to existing laws)
• Hydraulic side to side tilt (to control blade slope for grading, ditching, landscaping and terrace maintenance)
• Hydraulic lift to control depth of cut
• Hydraulic blade angle (to smoothly handle different textures of dirt, sand and gravel)
• Tandem axle (for better stability and ease in leveling)
• Ditch depth up to 2' with 2 passes of grader each direction in gumbo soil

STANDARD EQUIPMENT

• Single Axle
• 14' Reinforced moldboard
• Hydraulic lift with safety stop
• Hydraulic side to side tilt
• Hydraulic blade angle 55º either direction
• Hydraulic hose bank (hose end storage when not in use)
• Side crank jack with storage tab (safe place for jack while grader is in use)
• Cylinders: 2 - 4 x 8 x 1 1/4 and 1 - 4 x 36 x 2 1/2 extra heavy
• Hoses with pioneer ends

  OPTIONS

• Blade Ends for use as a box scraper
• Tandem axle (oscillating)
• Single or double tab hitch available
• Steerable rear axle
• Power pitch moldboard
• Rear return blade
• Electric or manual hydraulic controls
• Many lease and deferred payment programs

  SPECIFICATIONS

• LENGTH: 22'-9" with tandem, 19'-9" with single
• WIDTH: 9' narrow position
• HEIGHT: 5'-4"
• DRAWBAR PIN TO BLADE EDGE: 11'-0"
• BLADE EDGE TO REAR AXLE: 8'-6"
• MOLDBOARD HEIGHT: 21"
• FRAME TO CUTTING EDGE
  CLEARANCE: 28"
• REAR WEIGHT (CEMENT): 2700 lbs
• TONGUE WEIGHT: 2200 lbs
• TOTAL WEIGHT WITH TANDEM: 5500 lbs
• BLADE: 14' with 2 - 7' Industrial cutting edge (standard holes)
• TIRES: 16"/6 bolt highway speed (30% tread or better)

PRICE